- Foundry patterns, core boxes, negatives, pattern plates
- Checking casts and jigs
- Detailed models, prototypes and props
- Vacuum forming moulds using the product filled with aluminium powder in order to increase thermal conductivity
Skin contact must be avoided by wearing protective gloves. Overalls or other protective clothing should be worn when mixing, laminating or sanding. Contaminated work clothes should be thoroughly cleaned before re-use. Eye protection should be worn if there is a risk of liquid product entering the eyes. Use this product with at least room size ventilation or in proximity to a forced outlet air vent and do not inhale/breath fumes. Fumes will quickly dissipate with adequate ventilation. Respiratory protection should be worn if there is insufficient ventilation.
These products have a limited shelf life and the shelf life is reduced after opening. Remaining product should be used as soon as possible. Immediately replacing the lids on both containers after dispensing product will help prolong the shelf life of the unused product. All liquid urethanes are moisture sensitive and will absorb atmospheric moisture which results in foaming. Any accidental spillage should be soaked up with absorbent material (sand, sawdust etc.) Storage should be in a warm dry place out of direct sunlight.